Smoke Circle Science Museum Exhibitions Non standard Customization

Exhibition Name: Smoke Circle Example Introduction: Exhibition items use vivid and interesting ways to allow the audience to understand the phenomenon of atmospheric circulation through interactive participation. Exhibitions consist of exhibition booths, atomizers, rubber rings, and other components. The audience presses the start button, and by pressing down on the rubber ring, the atomized water vapor inside the booth is sprayed out from the circular hole. The airflow impacts the surrounding air to form a vortex like circulation, which rises in the form of a circle and eventually disappears into the air. Parameters: Size: φ 1 × 0.8M Function: exhibits consist of a booth, atomizer, rubber ring, etc. The audience presses the start button, and by pressing down on the rubber ring, the atomized water vapor inside the booth is sprayed out from the circular hole. The airflow impacts the surrounding air to form a vortex like circulation, which rises in the form of a circle and eventually disappears into the air. Technical parameters: 1. Nebulizer: 10 heads with float 2. Leakage protection: DZ47LE-32/C10, national 3C certification 3. Switching power supply: LRS-35-12, national 3C certification 4. Switching power supply: LRS-200-45, national 3C certification 5. Water mist generator: voltage DC45V-48V, water shortage sensing probe, ten heads 6. Water level monitor: maximum power consumption 10W, maximum voltage 0-100VDC, maximum switching current 0.5A 7. ★ Main control board: main control board: DC24V, I/O port, 232 communication 8. Contactor: CJX2-1210, national 3C certification 9. Relay: JZX-22F/4Z, national 3C certification 10. Button: GQ25-11E/B/24, national 3C certification Operation mode: dual hands Place it on the "palm" pattern; Then press down and observe the shape of the smoke ring.