Car window
- In stock with stable lead times — single units or complete sets
- Size, appearance and interaction can be adapted to the museum’s theme
- For science museums, campus science rooms, community science centers and mobile science museums
- Export packing and overseas on-site installation support
Exhibition Name
Car window
Science Behind It
The electric window system consists of windows, window lifters, motors, relays, switches, and other devices. A typical electric window system is equipped with two sets of control switches. A set of main switches installed on the dashboard or driver's side door armrest, which are controlled by the driver to raise and lower each window. Another set is installed on each passenger door as a toggle switch, which can be operated by passengers. Generally, there is also a circuit breaker installed on the main switch. If it is disconnected, it will not work when separated. From the schematic diagram, it can be seen that the window lifting mechanism of a car is composed of a motor, a main arm, a secondary arm, a main guide rail, a secondary guide rail, a cylindrical gear, and a base plate. When the button is pressed, the motor starts working, which rotates the main arm through the cylindrical gear and drives the upper end of the auxiliary arm to move in a straight line along the auxiliary guide rail through the connecting shaft. At this point, the lower and upper ends of the main and auxiliary arms move in opposite directions along the main guide rail, causing the glass on the main guide rail to move up and down.
Dimensions
Specification size: 0.75 × 0.68 × 2.1 meters.
exhibits materials: ① Booth: Bottom cabinet sheet metal, thickness ≥ 1.2mm
② Tabletop: Cambert board, thickness ≥ 12mm
③ Instruction board: Acrylic UV spray painting
④ Tabletop fixing components: standard triangle lock
Product structure: Designed with a science museum booth. The booth is made of 1.2mm galvanized steel plate, and the tabletop is made of 12mm anti PET plate. The internal carbon steel and damping shock pads are reserved, and heat dissipation holes are reserved. It is equipped with leakage protection device, and the modular design is convenient for later maintenance. All sheet metal components are treated with electrostatic spraying technology.
System Composition
Exhibition booth+display chip+instruction board
Rendering or physical photo
