Illusionary Image
- In stock with stable lead times — single units or complete sets
- Size, appearance and interaction can be adapted to the museum’s theme
- For science museums, campus science rooms, community science centers and mobile science museums
- Export packing and overseas on-site installation support
Colorful Image - Introduction to Science Museum Exhibitions and Exhibits
Exhibition description and introduction of scientific principles:
Exhibition items consist of many neatly arranged small circles forming a large pixel wall. Each small circular piece has a circle of light source, which can present different colors. Under the control of the program, the small disc rotates back and forth, combined with different colors of light, to form various images. Exhibition items are equipped with a motion sensing system that can capture audience movements and interact with them. Viewers can see the image formed by their actions on the pixel wall, enhancing the fun. The audience enters the exhibition hall to observe the patterns formed on the pixel wall, while extending their arms and making different movements to interact with the pixel wall and see what kind of patterns will be presented. Pixel count: 8192 Operation instructions: 1 Enter the prologue hall; two Observe the pattern formed by the pixel wall; three Make different actions to interact with the pixel wall.
Exhibition core configuration parameters and related requirements (for reference, can be customized):
Size: 8 × 0.5 × 4m
Bill of Materials
Galvanized square tube: 40 × 40 × 2.5mm, 1200kg
Cold rolled steel plate: T=2mm, 250kg
Paint: 10kg
Other materials (welding, polishing, screws, joints, etc.): 1 item
Equipment List
▲ Computer: i7 8G 512G SSD with 4G dedicated graphics, 1 unit
Motion sensing camera: 64 bit (x64) processor, built-in USB 3.0 bus, 4GB RAM, 1
Mechanical optoelectronic device: 32m ²
Speaker: Frequency response 50Hz-20kHz (± 3dB), sensitivity 95dB, 1 unit
Socket: 4-position 250V 10A, 1 piece
Wire and cable, signal line: 1 item
Leakage protection switch: 1 unit
Electrical system (air switch, switch power distribution cabinet, wire, terminal block, guide rail, trunking, etc.): 1 unit
exhibits need to run in the following environment
Ventilation: General ventilation requirements for venues
Strong current (voltage level, power): 220V, 1200W
Air temperature and humidity: Normal temperature and humidity requirements for the venue
Control data cable: None
Water supply (pressure, flow rate): none
Network: Yes
Compressed air (pressure, flow rate): none
Load bearing/off load/heavy load/dynamic load: The ground load bearing capacity shall not be less than 4KN/㎡
Hanging and connection requirements: None
Fire protection: Normal fire protection settings for the exhibition hall
Other: None