Two sided world
- In stock with stable lead times — single units or complete sets
- Size, appearance and interaction can be adapted to the museum’s theme
- For science museums, campus science rooms, community science centers and mobile science museums
- Export packing and overseas on-site installation support
Double sided World - Science Museum Exhibitions
Exhibition description and introduction of scientific principles:
The exhibition items are located on the side wall of the foyer, with a grille as the main body for drawing the paintings. Two paintings with different contents are combined into one through the grille.
When the audience enters the exhibition hall and their perspective is on the left side of the grille, a complete picture is presented. When the audience's perspective moves to the right side of the grille, they can see that the previous picture has become a completely different one.
Operation Instructions:
1. Before the exhibition items;
2. View the content of the grille painting from the left or right;
3. From the opposite perspective, observe the content of the grille painting.
Exhibition core configuration parameters and related requirements (for reference, can be customized):
Size: 8 × 8m
Bill of Materials
Galvanized square tube: 40 × 40 × 2.5mm, 1350kg
Cold rolled steel plate: T=2mm, 1500kg
Acrylic: T=10mm, 1kg
Stainless steel: T=5mm, 9kg
Aluminum plate: T=6mm, 700kg
Paint: 1.38 kg
Other materials (screws, joints, etc.): 1 item
Equipment List
Light and shadow lamp: 1 item
Wire and cable, signal line: 1 item
Leakage protector: 1P+N poles, rated current 10A, 1 unit
exhibits need to run in the following environment
Ventilation: General ventilation requirements for venues
Strong current (voltage level, power): 220V, 300W
Air temperature and humidity: Normal temperature and humidity requirements for the venue
Control data cable: None
Water supply (pressure, flow rate): none
Network: Yes
Compressed air (pressure, flow rate): none
Load bearing/off load/heavy load/dynamic load: The ground load bearing capacity shall not be less than 4KN/㎡
Hanging and connection requirements: None