Cylindrical imaging
- In stock with stable lead times — single units or complete sets
- Size, appearance and interaction can be adapted to the museum’s theme
- For science museums, campus science rooms, community science centers and mobile science museums
- Export packing and overseas on-site installation support
Cylindrical Imaging - Customization of Science Museum Exhibitions, Campus Community Science Popularization Equipment, Source Manufacturer of Science Exhibitions Description and Introduction of Scientific Principles:
The objects observed by participants through the cylinder are not the same as the original image. For example, the severely distorted sedan in the picture becomes a normal model under the reflection of the cylinder. The reduced reflection of a planar image on a cylindrical stainless steel mirror surface, according to the principle of mirror emission, the reflection angle is equal to the incident angle, the normal is perpendicular to the tangent point, and at the same time, the normal must pass through the center of the cylindrical cross-section. Therefore, when the viewing angle is oblique, the viewing angle is reduced, and our portrait is squeezed towards the center on both sides of the cylindrical mirror surface.
Main technical parameters of exhibits:
Specification: 1 * 0.6 * 1 1. exhibits Material: ① Booth: 30 square tube frame, 1.2mm cold-rolled plate enclosure, surface painted ② Tabletop: Cambert plate, thickness ≥ 10mm ③ Instruction board, graphic board: acrylic UV spray painting ④ Maintenance door: 1.2mm cold-rolled plate surface painted ⑤ Protective cover: transparent acrylic+customized color acrylic according to actual needs 2. Main configuration: ① Leakage switch: pole number: 2P+N; Release current: 16A; arc extinguishing medium: residual current circuit breaker; Breaking capacity: 6KA ② Button: Red wave button GQ25-11E Installation hole size Φ 25; Working voltage 250V; Working current: 5A; Rated heating current: 10A; Mechanical lifespan: 1 million cycles; Head protection level: IP65; Protection method: Waterproof. ③ Solid state relay: SSR-4810 DA rated parameters 10A 250V INPUT: 3-32VDC OUTPUT: 24-480VAC ④ Delay module: SHZHY-2013-3-3GHR input: 220VAC output: both AC and DC can delay time: 0-10 minutes 3. Energy requirement: AC220V 200W
Principle explanation and demonstration video: