Archery robot
- In stock with stable lead times — single units or complete sets
- Size, appearance and interaction can be adapted to the museum’s theme
- For science museums, campus science rooms, community science centers and mobile science museums
- Export packing and overseas on-site installation support
Introduction to Archery Robot Science Museum Exhibitions
Shanghai Inertia, the original supplier of campus science museum and community science popularization equipment
Robot technology is a comprehensive technology that spans multiple disciplines. Archery robots involve the automatic control of the robotic arm itself. Through the issuance of commands by the robotic arm, it controls the robotic arm to perform specified actions according to software settings, grab the arrow, and shoot it onto the target. During the process of movement, sensors are required to sense external signals, and electronic technology and mechanical engineering technology are used to support every action, force generation, and force application of the robotic arm.
The mechanical arm joints required for archery include the palm, wrist, forearm, upper arm, the connection and rotation between arms, as well as the rotation and connection of the base. Shanghai Inertia Automation Co., Ltd., a manufacturer of science museum robots, reminds everyone that the mechanical arm of an archery robot is a multi joint mechanical arm with six movements and five and a half degrees of freedom, which can imitate all the main functions required by the human upper limb during archery. The six movements can be controlled on a single axis or multiple axes according to the needs of the archery movement.
Mechanical arm:
The robotic arm is a high-precision, high-speed dispensing robotic arm. Corresponding to small-scale production methods, improve production efficiency. In addition to dispensing operations, it can also handle various tasks such as UV irradiation, part placement, screw locking, circuit board cutting, etc.
The working principle of a robotic arm:
Compressed air is sent into the glue bottle to press the glue into the feed tube connected to the piston chamber. When the piston is in the upward stroke, the piston chamber is filled with glue. When the piston pushes down the dropper needle, the glue is pressed out from the needle mouth. The amount of glue dripped is determined by the distance of the piston's downward movement and can be manually adjusted or controlled in software.
The robotic arm is the most widely used automated mechanical device in the field of robotics technology, and its presence can be seen in industrial manufacturing, medical treatment, entertainment services, military, semiconductor manufacturing, and space exploration. Although they have different forms, they all share a common feature of being able to receive instructions and accurately locate a point in three-dimensional (or two-dimensional) space for work.
Types of robotic arms:
Mechanical arms are divided into multi joint mechanical arms, Cartesian coordinate mechanical arms, spherical coordinate mechanical arms, polar coordinate mechanical arms, cylindrical coordinate mechanical arms, etc. according to their structural forms. The image on the right shows a common six degree of freedom robotic arm. He has six degrees of freedom consisting of X movement, Y movement, Z movement, X rotation, Y rotation, and Z rotation.
Structure of robotic arm:
A horizontal multi joint robotic arm generally has three main degrees of freedom: Z1 rotation, Z2 rotation, and Z movement. By adding X rotation to the execution terminal, Y rotation can reach any coordinate point in space.
A Cartesian coordinate system robotic arm has three principal degrees of freedom. Composed of X movement, Y movement, and Z movement, any coordinate point in space can be reached by adding X rotation, Y rotation, and Z rotation to the execution terminal. Shanghai Inertia Automation Co., Ltd., a manufacturer of science museum robots, reminds everyone that for industrial applications, sometimes it is not necessary for a robotic arm to have a complete six degrees of freedom, but only one or a few of them. Cartesian coordinate system robotic arms can be composed of single axis robotic arms.
Single axis robotic arms are widely used in industry as a component. The modularization of single axis robotic arms greatly reduces the cost of industrial design, as professional manufacturers have the advantages of good quality assurance and mass production, making the use of components more advantageous than designing robotic arms on their own.
Common combinations of orthogonal robotic arms include cantilever, gantry, upright, and transverse styles.
Application of robotic arm:
1. Brain controls arms:
The robotic arm is fully controlled by the user's mind, agile enough to pick up a glass and drink a drink without the help of others. The creator of this robotic arm is a research team consisting of members from institutions such as the California Institute of Technology, where neural chips are implanted into the posterior parietal cortex of a specific robot's brain.
The implantation position of the control chip for this robotic arm is different from that of other paralyzed users who have previously controlled the robotic arm. Usually, this type of control chip is implanted in the brain area that controls muscles, while PPC is the area that controls our action intention, movement, and makes the robotic arm controlled by the robot move more smoothly and naturally. The science museum robot manufacturer Shanghai Inertia Automation Co., Ltd. reminds everyone that what robots need to do is to think about what they plan to do, and through a lot of practice, they can make the robotic arm perform the task they are considering.
2. Rubber control arm:
Scientists have developed rubber robotic arms that can grab ants instead of crushing them to death. At present, this type of robotic arm is still in the research and development stage. Scientists immerse wires into liquid silicone rubber, and after solidification, extract the wires to obtain tentacles that are 5-8 millimeters long and have thin hair strands. The tentacle is divided into many small compartments inside, and various movements can be made by compressing air flow, which can grip the ant's waist without any harm.
Scientists believe that this type of tentacle will have great potential in the future, not just for catching ants, but for performing precision surgeries such as heart and embryonic vascular procedures.





