Science Museum Exhibits · Interactive Exhibits · Shipped Worldwide
Obedient ball
Campus Science Museums

Obedient ball

所属门类:Campus Science Museums Custom build available Batch supply available
  • In stock with stable lead times — single units or complete sets
  • Size, appearance and interaction can be adapted to the museum’s theme
  • For science museums, campus science rooms, community science centers and mobile science museums
  • Export packing and overseas on-site installation support
Images and specifications are indicative only; the supply contract and approved drawings govern.

Exhibition size: 1.20 * 0.91 * 1.80 (m)

Operating instructions: Press the "Start" button and observe the movement of the ball in the airflow.

Function Overview: Exhibitions consist of a vertical pipe and a horizontal U-shaped pipe connected to it, a lightweight ball, and a fan. Press the button to start the fan, and you will see that the small ball moving along the airflow obediently changes its vertical upward direction when it reaches the port on the U-shaped pipe, entering the horizontal pipe. Why is the ball so obedient? According to Bernoulli's principle, the higher the fluid velocity, the lower the pressure; The smaller the flow rate, the greater the pressure. When the fan is started, the vertical upward airflow lifts the small ball inside the tube and moves upward along the center of the airflow. The vertical airflow creates negative pressure inside the U-shaped tube, with the lowest pressure at the lower port. When the ball moves to the upper port of the U-shaped tube, it obediently changes its vertical upward direction under the action of negative pressure, is sucked into the horizontal pipeline, and moves towards the lower port. In daily life, the lifting effect of airplanes, banana balls in football, and spinning balls in table tennis are all applications of Bernoulli's principle. The discovery of Bernoulli's principle is of great significance for human understanding of the characteristics and laws of fluids.

Main configuration of materials for exhibitions:

U-shaped pipe: transparent acrylic pipe, pipe elbow: transparent PVC Electrical main configuration: ① Leakage switch: Chint DZ47LB-32 C16 pole number: 2P+N; Release current: 16A; arc extinguishing medium: residual current circuit breaker; Breaking capacity: 6KA ② Button: Red wave button GQ25-11E Installation hole size Φ 25; Working voltage 250V; Working current: 5A; Rated heating current: 10A; Mechanical lifespan: 1 million cycles; Head protection level: IP65; Protection method: Waterproof. ③ Fan: 130FLJ1 220VAC Energy Requirements: AC220V 200W Booth Materials Main Configuration: ① Booth: Customized shaped surface sandblasted aluminum parts, aluminum alloy profiles, bi-directional plug injection molded parts ② Table: 12mm ceramic panel (white), 16mm wooden board, injection molded table edge ③ Instruction board: Customized aluminum alloy skeleton, 8 injection molded part connections, 5mm solid wood board, 3mm aluminum board, wood board surface bright photo, transparent acrylic polished and UV painted ④ Table fixing parts: Die cast aluminum parts powder coated, national standard connectors and fasteners

Video demonstration explanation:

Call Message Top