Magdeburg hemispheres test
- In stock with stable lead times — single units or complete sets
- Size, appearance and interaction can be adapted to the museum’s theme
- For science museums, campus science rooms, community science centers and mobile science museums
- Export packing and overseas on-site installation support
Exhibition size: 1.20 * 0.91 * 1.80 (m)
Operating instructions: 1. Cover the hemisphere, press the "start" button, and when the vacuum is reached, try pulling the hemisphere. 2. Close the two sets of rubber hemispheres separately, press them tightly, remove the air inside, and then pull them apart with force. Carefully observe the difference between the two sets of rubber balls and think about why the required force to pull them apart is very different.
Function Overview: Exhibition items consist of a booth, vacuum pump, metal Madberg hemisphere, intact rubber hemisphere, rubber hemisphere with a hole pierced, etc. The audience conducted experiments on different hemispheres to understand the existence of atmospheric pressure. In 1654, Otto von Curie, the then mayor of Marburg, conducted a scientific experiment in Regensburg, Roman Empire (now Regensburg, Germany) to prove the existence of vacuum. And this experiment is also known as the "Magdeburg Hemisphere" experiment due to Curie's title. The two hemispheres where the experiment was conducted are still preserved in the German Museum in Munich. There are also replicas for teaching purposes now, used to demonstrate the principle of air pressure. Their volume is much smaller than that of the hemisphere in the past. After evacuating the space of the hemisphere, it does not require more than ten horses, and some can be pulled apart by only four people. The Marburg Hemisphere experiment proves that atmospheric pressure exists and is very strong. In the experiment, the air inside the two hemispheres was removed to reduce the number of air particles inside the spheres. The atmosphere outside the spheres tightly compressed the two hemispheres together, making it difficult to separate. The more you withdraw, the greater the pressure.
Main configuration of materials for exhibitions:
Bracket: Acrylic, Hemisphere: Cast Iron Electrical Main Configuration: ① Switching Power Supply: Mingwei NES-35-24 Input AC220V, Output DC24V, Power 35W ② Leakage Switch: Chint DZ47LB-32 C16 Pole Count: 2P+N; Release current: 16A; arc extinguishing medium: residual current circuit breaker; Breaking capacity: 6KA ③ Button: Red wave button GQ25-11E Installation hole size Φ 25; Working voltage 250V; Working current: 5A; Rated heating current: 10A; Mechanical lifespan: 1 million cycles; Head protection level: IP65; Protection method: Waterproof. ④ Vacuum Pump: Low Noise Vacuum Pump Energy Requirements: AC220V 1500W Booth Materials Main Configuration: ① Booth: Customized shaped surface sandblasted aluminum parts, aluminum alloy profiles, bi-directional plug injection molded parts ② Table: 12mm ceramic panel (white), 16mm wooden board, injection molded table edge ③ Instruction Board: Customized aluminum alloy skeleton, 8 injection molded part connections, 5mm solid wood board, 3mm aluminum board, bright photo on the surface of the wood board, transparent acrylic polished and UV painted ④ Table fixing parts: Powder coated die-casting aluminum parts, national standard connectors and fasteners





