Catapult ball
- In stock with stable lead times — single units or complete sets
- Size, appearance and interaction can be adapted to the museum’s theme
- For science museums, campus science rooms, community science centers and mobile science museums
- Export packing and overseas on-site installation support
Shooting Ball - Science Museum Exhibitions
Exhibition items description and operation instructions:
Set up a specially designed U-shaped pipeline, interact with the audience by pulling ropes, compress the air inside the pipeline, and force the ball to pop out from one end of the U-shaped pipeline and fall into the top recycling net back into the pipeline.
Operation Instructions:
1. Pull the rope to eject the ball;
2. Consider why the ball was ejected.
Exhibition core configuration parameters and related requirements (for reference, can be customized):
Size: 1.2 × 1.5 × 4m
Bill of Materials
Galvanized square tube: 40 × 40 × 2.5mm, 150kg
Cold rolled steel plate: T=2mm, 200kg
Acrylic: T=10mm, 40kg
Paint: 6kg
Collecting net: 1 set
Other materials (screws, joints, etc.): 1 item
Equipment List
Nothing
exhibits need to run in the following environment
Ventilation: General ventilation requirements for venues
Strong electricity (voltage level, power): none
Air temperature and humidity: Normal temperature and humidity requirements for the venue
Control data cable: None
Water supply (pressure, flow rate): none
Network: None
Compressed air (pressure, flow rate): no load/unbalanced load/heavy load/dynamic load: ground load not less than 4KN/㎡
Hanging and connection requirements: None
Fire protection: Normal fire protection settings for the exhibition hall
Other: None