Bubble Curtain
- In stock with stable lead times — single units or complete sets
- Size, appearance and interaction can be adapted to the museum’s theme
- For science museums, campus science rooms, community science centers and mobile science museums
- Export packing and overseas on-site installation support
Bubble Screen - Science Museum Exhibitions
Exhibition description and introduction of scientific principles:
Set up a large bubble device that can be controlled by two viewers pulling ropes from left and right respectively. By manipulating the rope, the internal rope of the bubble device is pulled apart to form a giant bubble membrane. The exhibition can be linked with the treehouse, where the audience on the upper level of the treehouse can blow air on the bubble wrap and observe its shape. Operation instructions: Two viewers lift two long ropes along the guiding cable to create a large soap film. Another viewer blew air from the leaping layer, and as the soap film flew out and became thinner, the viewer could see more beautiful interference colored patterns of light appearing on it. Blowing air onto bubbles can create many fascinating flowing patterns, or change the shape of soap film into various interesting reflective shapes.
Exhibition core configuration parameters and related requirements (for reference, can be customized):
Size: 3 × 2 × 6m
Bill of Materials
Galvanized square tube: 30 × 30 × 1.5mm, 60kg
Galvanized square tube: 40 × 40 × 2.5mm, 1350kg
Cold rolled steel plate: T=2mm, 1500kg
Acrylic: T=12mm, 1kg
Stainless steel: T=5mm, 150kg
Steel wire rope: φ 5mm, 30m
Bubble water: 100kg
Sensor: 1 set
Equipment List
Water pump: rated flow rate (1.5m ³/h), 1 unit
exhibits need to run in the following environment
Strong current (voltage level, power): 220V, 1500W
Ventilation: General ventilation requirements for venues
Control data cable: None
Air temperature and humidity: Normal temperature and humidity requirements for the venue
Network: Yes
Water supply (pressure, flow rate): self circulating
Load bearing/off load/heavy load/dynamic load: not less than 4KN/m ²
Compressed air (pressure, flow rate): none
Fire protection: General fire protection requirements for venues
Hanging and connection requirements: Local suspension is required.
Other: The ground needs to be waterproofed and anti slip rubber pads should be laid.