Coriolis force
- In stock with stable lead times — single units or complete sets
- Size, appearance and interaction can be adapted to the museum’s theme
- For science museums, campus science rooms, community science centers and mobile science museums
- Export packing and overseas on-site installation support
Coriolis Force - Customized Science Museum Exhibitions, Campus Community Science Popularization Equipment, Source Manufacturer of Science Exhibitions Description and Introduction of Scientific Principles:
Operating instructions: 1. Press the "Start" button, and the belt will start rotating and remain parallel; 2. Use your hands to rotate the large disk at the bottom in both forward and reverse directions, and see how the state of the belt will differ? Function Overview: Exhibition items consist of a motor drive mechanism, a belt demonstration mechanism, a manual turntable, etc. The audience presses the 'start' button, and the belt begins to rotate and remain parallel; Using your hands to rotate the large disk at the bottom in both forward and reverse directions, you will see that the parallel belts will be deformed by external forces. Scientific principle: When the disk rotates, the belt between the two axes is a composite motion of axial movement and movement with the disk. When the direction of the belt's axial movement is the same as the direction of the disk's movement, the belt between the two axes protrudes outward; When the two movements are opposite, the belt between the two axes is concave, which is the result of the Coriolis force.
Main technical parameters of exhibits:
Size: 0.8 × 0.6 × 1 1. exhibits Material: ① Booth: 30 square tube frame, 1.2mm cold-rolled plate enclosure, surface painted ② Table: Cambert board, thickness ≥ 10mm ③ Instruction board: Acrylic UV spray painting ④ Maintenance door: 1.2mm cold-rolled plate surface painted ⑤ Pulley: Nylon 2. Main configuration: ① Leakage switch: Pole number: 2P+N; Release current: 16A; arc extinguishing medium: residual current circuit breaker; Breaking capacity: 6KA ② Motor: 15W AC200/220V 1300/1600rpm 0.25A ③ Button: Red wave button GQ25-11E Installation hole size Φ 25; Working voltage 250V; Working current: 5A; Rated heating current: 10A; Mechanical lifespan: 1 million cycles; Head protection level: IP65; Protection method: Waterproof. 3. Exhibition requirements: ① Energy requirement: AC220V 200W ② Installation foundation: direct placement ③ Access channel: door frame size (width × height) ≥ 1.2m × 2.0m, continuous turning interval of the channel ≥ 2m ④ Maintenance channel: no need
Principle explanation and demonstration video: