Flying rope
- In stock with stable lead times — single units or complete sets
- Size, appearance and interaction can be adapted to the museum’s theme
- For science museums, campus science rooms, community science centers and mobile science museums
- Export packing and overseas on-site installation support
Exhibition Name: Flying Rope
1、 Basic information
1. Schematic diagram of the appearance of exhibits
2. Introduction to Exhibits
Exhibitions mainly consist of exhibition booths (marked 1), cotton ropes (marked 2), rotating mechanisms (marked 3), buttons (marked 4), and other parts. The cotton rope is installed between the driving wheel and the driven wheel of the rotating mechanism. The audience presses the button to start the rotating mechanism. Due to the friction between the driving wheel and the driven wheel, the rope starts to move. After a part of the rope moves, due to inertia, the soft rope does not change back into a rope, but continues to move forward like a hard material wheel, finally forming a rope loop. When the audience interferes with the rope loop with other objects, it will also present various different states.
3. Display purpose
Exhibitions showcase inertia to the audience through electromechanical interaction.
4. Exhibition knowledge points
An object in uniform circular motion, due to its own inertia, always wants to move along the tangent direction, but due to the centripetal force, it cannot fly out along the tangent direction and is restricted from moving along the circle. If the external force that provides centripetal force suddenly disappears, the object will move along the tangent direction due to its own inertia.
5. Exhibition operation process:
6. Notes
1) The rope is sturdy and durable.
2) The exhibition style is consistent with the exhibition area style.
3) The motor can stop immediately when subjected to significant tension from the rope.
7. Reference dimensions for the appearance of exhibits (unit: meter)
long
wide
Booth height
Overall dimensions
1.6
0.7
0.8
8. Composition of exhibitions
1) Main Material List
Main component names
Main materials
Processing Technology
booth
30 # square tube+2mm cold-rolled steel plate+artificial stone countertop+wood edging
Rust prevention and baking paint
acrylic cover
10mm transparent acrylic
cotton rope
Diameter approximately 6mm
Rotating mechanism
ABS disc, tension spring, stainless steel disc
2) Main equipment list
name
Specification
quantity
Electric motor
/
1
button
/
1
control circuit board
Customized
1
2、 Exhibition operation management
1. Daily management
1) Open all day, no need for dedicated personnel to guard, inspection is required.
2) Automatically turn on when powered on, automatically turn off when powered off.
2. Maintenance and Repair
The maintenance door is set up reasonably, and the exhibited equipment and components are easy to disassemble and repair.
3、 Construction conditions
1. Environmental requirements
Category
requirement
floor load-bearing capacity
≥ 3500N/ ㎡
power consumption
220v/500w
Do you need water supply and drainage
□ Water supply □ Drainage □ Water supply and drainage
Do you need to connect to the network
□ Yes √ No
Environmental light demand
Normal
Video demonstration:
